|
STRIDA REPAIR |
|
Remove a wheel. More repairs | ||
Tools needed: 4 + 5 mm unbrako
Protect your floor - or Strida, and place it up-side-down.
Gentle
lead the belt off the big belt-wheel, turning the pedals, if you want to remove
the back-wheel.
They are important, as the adjust
the brake to the disc. Remove the bolt in the axel, holding the magnet / metal disc, with a 4 mm unbrako.
There are several washers on mine in the back. Only one in the front, on the magnet.
The wheel can now be removed for fixing a flat tire, replacement or belt-drive shift. To replace the back-wheel, put it halfway back on the axel. Mount the belt on the little belt-wheel. Then push it all the way in on the axel. Replace the bolt with the metal disc/magnet in the axel.
Gentle replace the belt on the the front belt-drive, turning the pedals and leading it with your fingers.
Replace the disc-brake.
|